1. If there is water leakage at the joint of the valve and the pipeline, the adhesive tape shall be wrapped at the joint point without drying, and the best anti clockwise direction shall be used when wrapping, so that the valve will be tightened more and more when it is connected.
2. If the valve itself is leaking, it is necessary to disassemble the valve to participate in sealing or O-ring, but it is suggested to replace it more conveniently.
A. if the industrial valve leaks water, if it is not the valve itself, the sealing ring shall be used at the joint of the valve and the pipeline,
B. if the valve is leaking, it is better to return to the manufacturer for repair. If it is inconvenient, the manufacturer is the only one to repair it.